DCS1000-ZS (Kayan cika: Granule, Auna a saman)
DCS1000-ZS (Kayan cika: Granule, Auna a saman)
Gabatarwa
DCS1000-ZS yafi hada da nauyi filler (Variable diamita bawul iko), frame, yin la'akari dandali, rataye jakar na'urar, jakar clamping na'urar, dagawa dandamali, na'ura, lantarki kula da tsarin, pneumatic kula da tsarin, da dai sauransu Lokacin da marufi tsarin aiki, baya ga jakar wurin da hannu, tsarin marufi yana cika ta atomatik ta hanyar sarrafa shirye-shiryen PLC, kuma ana kammala hanyoyin clamping jaka, blanking, metering, sako-sako da jakar, isarwa, da sauransu bi da bi;Tsarin marufi yana da halaye na ƙidaya daidai, aiki mai sauƙi, ƙaramar amo, ƙarancin ƙura, ƙaramin tsari, shigarwa mai dacewa, aminci da aminci, da amintaccen haɗin gwiwa tsakanin wuraren aiki.
Halaye
| Halaye | ||
| Filler | Filler na nauyi (Mai sarrafa bawul mai canzawa) | |
| Kidaya | Yi nauyi kamar rataye | |
| Tsarin sarrafawa | Ayyuka kamar gyaran ɗigo ta atomatik, ƙararrawa kuskure da kuskuren gano kansa, Sanye take da hanyar sadarwa, mai sauƙin haɗawa, hanyar sadarwa, na iya zama tsarin marufi a kowane lokaci ana kulawa da sarrafa hanyar sadarwa. | |
| Iyakar kayan: Rashin ruwa mara kyau na foda, kayan granular. | ||
| Matsakaicin aikace-aikace: Chemical, Pharmaceutical, abinci, taki, ma'adinai foda, lantarki ikon, kwal, metallurgy, ciminti, nazarin halittu injiniya, da dai sauransu | ||
| Paramete | ||
| Iyawa | 20-40 jaka/h | |
| Daidaito | ≤± 0.2% | |
| Girman | 500-2000Kg/bag | |
| Tushen wuta | Musamman | |
| Matsi iska | 0.6-0.8MPa.5-10m3/h | |
| Bera mai busa | 1000-4000m3/h | |
| Muhalli: Temp -10 ℃-50 ℃.Danshi | 80% | ||
| Na'urorin haɗi | ||
| Zaɓin aikawa | 1. A'a 2. Mai jigilar sarka 3. Sarkar abin nadi 4. Trolley…. | |
| Kariya | 1. Rashin fashewa 2. Babu abin da zai iya fashewa | |
| Kawar da kura | 1. Cire kura 2. No | |
| Kayan abu | 1. Karfe 2. bakin karfe | |
| girgiza | 1. Sama da ƙasa (misali) 2. girgiza ƙasa | |
Marufi aiki tsari
1. Auna ma'aunin firikwensin.
| Ƙayyadaddun bayanai | SB-1 | Mafi ƙarancin nauyi a tsaye | 0Kg |
| Daidaiton aji | C3 | Ƙimar rabo mafi ƙarancin ƙima | 0.14Kg |
| Matsakaicin iya aiki | 1t | Hankali | 2.000mv/v |
| Safe iyaka load | 150% RC | Sifili fita | 1% RC |
| Juriya na rufi | ≥5000MΩ | Input impedance | 381± 4Ω |
| Ƙarfafa ƙarfin lantarki | 5-15V | An hana fitarwa | 350± 1Ω |
2. Mai sarrafawa yana buƙatar firikwensin gada mai juriya na waje, kuma an haɗa firikwensin zuwa kayan aiki kamar yadda aka nuna a hoton da ke ƙasa.Lokacin amfani da firikwensin waya huɗu, SN+ da EX+ na kayan aikin dole ne su kasance gajere, kuma SN- da EX- dole ne su kasance gajere.
