DCS50-L Injin cika atomatik
DCS50-L Injin cika atomatik
Gabatarwa
DCS50-L yafi hada da auger filler (mita hira gudun ƙa'ida), frame, yin la'akari dandali, rataye jakar na'urar, jakar clamping na'urar, dagawa dandamali, na'ura, lantarki kula da tsarin, pneumatic kula da tsarin, da dai sauransu Lokacin da marufi tsarin aiki, baya ga jakar wurin da hannu, tsarin marufi yana cika ta atomatik ta hanyar sarrafa shirye-shiryen PLC, kuma ana kammala hanyoyin clamping jaka, blanking, metering, sako-sako da jakar, isarwa, da sauransu.Tsarin marufi yana da halaye na ƙidaya daidai, aiki mai sauƙi, ƙaramar amo, ƙarancin ƙura, ƙaramin tsari, shigarwa mai dacewa, aminci da aminci, da amintaccen haɗin gwiwa tsakanin wuraren aiki.
Halaye
| Halaye | ||
| Filler | Auger filler | |
| Kidaya | Kirgawa kamar rataye | |
| Tsarin sarrafawa | Ayyuka kamar gyaran ɗigo ta atomatik, ƙararrawa kuskure da gano kuskuren kai, Sanye take da hanyar sadarwa, mai sauƙin haɗawa, cibiyar sadarwa, na iya zama tsarin marufi a kowane lokaci ana kulawa da sarrafa hanyar sadarwa. | |
| Iyakar abu: Foda, granular kayan. | ||
| Matsakaicin aikace-aikace: Chemical, Pharmaceutical, abinci, taki, ma'adinai foda, lantarki ikon, kwal, metallurgy, ciminti, nazarin halittu injiniya, da dai sauransu | ||
| Paramete | ||
| Iyawa | 200-300 jaka/h | |
| Daidaito | ≤± 0.2% | |
| Girman | 5-50Kg/bag | |
| Tushen wuta | Musamman | |
| Matsi iska | 0.6-0.8MPa.5-10m3/h | |
| Bera mai busa | 500-2000m3/h | |
| Muhalli: Temp -10 ℃-50 ℃.Danshi | 80% | ||
| Na'urorin haɗi | ||
| Jakar wuri | 1. Manual 3. Atomatik | |
| Kariya | 1. Rashin fashewa 2. Babu abin da zai iya fashewa | |
| Kawar da kura | 1. Cire kura 2. No | |
| Kayan abu | 1. Karfe 2. bakin karfe | |
| Palletizzing | Palletizzing na hannu, Ƙaƙƙarfan Palletizzing, Robot Palletizzing | |
| Dinka |
| |
Halayen ayyuka
1.Wannan kayan aiki ana amfani da shi ne don yawan cika kayan foda.
2.Screw ciyarwa, ƙayyadaddun ƙayyadaddun saurin juyawa, saurin tattarawa da daidaitattun za'a iya daidaita su.
3.Tsarin sarrafa ma'auni da aunawa shine nuni na dijital, kuma ana iya saita sigogin tsarin ba da gangan ba;firikwensin alama ce ta METTLER TOLEDO.Abubuwan lantarki sune alamar Schneider.
4.Abubuwan sarrafawa na tsarin pneumatic sune samfurori da aka shigo da su, sassan zartarwa sune samfurori masu inganci na gida, kuma akwatin kula da iska shine akwati da aka rufe a jiki.
5.Kayan kayan aiki suna da tsarin ƙirar ƙura mai ƙura, kuma an haɗa su tare da ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayan aiki tare da kayan aiki mai ƙura, wanda ke da tasiri mai kyau.
Tsarin aiki
Jakar hannu --- danna maɓallin farawa don matsa jakar --- farawa ta atomatik na ciyarwa da sauri --- juyawa ta atomatik zuwa jinkirin ciyarwa lokacin da aka saita ƙimar --- rufewa ta atomatik na bawul ɗin tsayawa a ƙarshen jinkirin ciyarwa- --Buɗewa ta atomatik na jakar jakar jakar marufi ta faɗi akan bel ɗin jigilar kaya - isar da jakar ɗinki - maimaita zagayowar da ke sama.Gabaɗayan tsarin yana buƙatar jakar hannu kawai, kuma sauran ayyuka ana kammala su ta atomatik ta ikon PLC.
